Siemens ပလက်တီနမ် မိတ်ဖက်ဟောင်ကောင် · ရှန်ကျန်း · ကွမ်တုန်း · ကျဲ့ကျန်း · ရှန်ဟိုင် · ကျန်းစု
ဖုန်းလိုင်း 400-830-8566
အိမ်/Insights
CBL · Insights

Turning project pitfalls into judgement criteria you can use

Not a product brochure: every article gives decision criteria, comparison tables and acceptance metrics. All articles are written in Chinese — contact us for an English briefing.

All articles (in Chinese)

Selection & implementation

CAD SELECTION
Guide

Choosing a 3D CAD system: Designcenter (formerly NX) vs Solid Edge vs Solid Edge X

Seven criteria: part complexity, assembly size, sheet metal, surfacing, CAM coupling, migration, deployment.

Chinese · 12 min
BOM / CHANGE
Post-mortem

Nine real pitfalls in a PLM rollout: from item coding to change implementation

Coding rules, BOM views, change classification, permissions, integration order, legacy data and adoption metrics.

Chinese · 14 min
SIM vs TEST
Simulation

Simulation is 30% off from test: check these five things first

Material model, boundary conditions, added mass, damping, solver settings — plus a four-step workflow.

Chinese · 10 min
MOM CLOSED LOOP
Manufacturing

Where to start with MOM: don't rush into MES

Three starting points, the minimum closed loop, the ERP/PLM/MES boundary and five metrics.

Chinese · 9 min
MODEL → VERIFY
Digital thread

Digital twin in three steps: from 3D model to line validation

Decide what to twin, then make it computable, verifiable and maintainable — three criteria, three anti-patterns.

Chinese · 10 min
FORM / FLOW / DATA
App building

Low-code for business systems: what Mendix can and cannot do

Five system types that fit, three that do not, and four ways to integrate with ERP and PLM.

Chinese · 9 min
MOM / MES / WMS / QMS
Concepts

MES, MOM, WMS and QMS: drawing the boundaries first

Three criteria to separate MES, MOM, WMS and QMS, plus who owns which data.

Chinese · 9 min
LOCAL REFINEMENT
Simulation

CFD meshing for complex geometry: five practices that reduce rework

Target before mesh size: boundary layer, wake refinement, templating and independence checks.

Chinese · 9 min
ELECTRODE / TOOLPATH
Mold & die

Mold CAM automation: building electrodes, templates and toolpath libraries

Electrode batching, machining templates, toolpath libraries and simulation before the first cut.

Chinese · 9 min
0D / 1D SYSTEM
System simulation

When system simulation is mandatory: four typical scenarios

When 3D is not enough: hydraulic circuits, thermal management, control strategy and fault cases.

Chinese · 9 min
Admin